Testing
North
America Only
We can test your RF Equipment to
make sure
that you are OSHA & FCC
Compiant.
OSHA
1910.97
Electromagnetic
Radiation
For normal environmental
conditions and for incident electromagnetic energy of
frequencies from 10 MHz to 100 GHz, the radiation protection
guide is
10 mW/cm.(2) (milliwatt per
square centimeter) as averaged over any possible 0.1-hour
period.
OSHA
Link
Shields and Grounding are the two
major things that can drastically change the way RF radiation
escapes from the RF Generator. We have special meters to test
the electromagnetic radiation escaping from your machines and
we can make adjustments to improve it.
FCC 47 CFR
1.1307
Industrial, Scientific &
Medical Band Frequency is 27.12Mhz +/-
180Khz
RF Generators must
operate
between
(26.940Mhz to 27.30Mhz)
FCC
Link
We can
test your equipment to make sure that it is
operating at the correct frequency and make
adjustments if needed. Special signage is also needed to be in
compliance.
FCC -
Yellow Triangle
(ANSI C95.2-1982)
OSHA - RF Hazard - Red &
Black Diamond Type (shown
below)
OSHA - Pace Maker Warning -
Danger or Caution Type
White background with Red &
Black Danger
or Orange background
"Caution..."
Signs to be put on doorways
outside RF Equipment areas
(630)
834-2010
| 
